Installing a door as winter teases

 I follow a video blog called Goonzquad. It's two young brothers that apparently have no jobs other than whatever YouTube pays them, and what they make on "merch" sales. They first started documenting their work as subcontractors in the construction trade, doing just about anything they were asked, like demolition, painting, and minor carpentry. Then, they began to buy wrecked exotic cars, completely disassembling them, buying new parts, and putting them together. Keep in mind they have apparently received no formal training, just learning as they go. They now have a garage filled with Ferraris, Lamborghinis, and other high end muscle cars. Recently, they bought an "abandoned" house on a Tennessee mountaintop, stripped it to the studs, and are rebuilding much of it on their own. What I like about it is their complete lack of fear of error, their unquenchable enthusiasm, and insistence on doing it right. They are an inspiration.

The door was here. Should have 
taken a picture before I removed it.

That helps when I tackle a new project, like finally replacing the inadequate, non-functioning, and dangerous side door into the pantry. Luckily the door was a standard size, so we picked a pre-hung door at Home Depot. Then under the direct supervision and guidance of my Uncle Ed, we installed the door.

 First I ripped out all the molding and found that the opening was not even close to square, with the center near the latch narrowing to exactly the same dimensions as the new frame. It JUST fit. Then, after installing the door and adjusting the level, it was time to insulate, put in new molding then paint it all. We decided to go with a similar scheme as the other side door. 

The door is metal and much more secure and tight. I'm quite sure the unheated pantry will stay much warmer in the winter and will help keep the pipes in the half bath from freezing in the winter. 

I've been puttering around with some other projects. I did some framing for the first time in the garage. The "sponginess" of the second floor of the garage has made me a bit nervous so I married some two by fours to help firm up the main support beam that spans the garage. 

Finished. I like the way it came out.
Got some stucco work to do too.

I wrote about the annual leaf battle and that war goes on with no clear victors. The community farming plot has been overwhelmed with community leaves so I'm back to bagging them and leaving at the curb. Good news is that the Norway Maples are finally giving up for the winter and dropping their leaves so this year's struggles will soon be over. 

I finally figured out how to take the dryer apart and completed a much overdue cleaning. This is a case where online videos lead me astray. Every Maytag dryer video I found showed that taking apart the dryer was a simple case of popping the top up and removing the front screws. I eventually noticed two other screws securing the top and front face of the dryer and was able to get the thing open. Pro tip: I highly recommend taking apart your dryer and getting out all the lint that escapes the filter. That lint is a real fire hazard. I also lubricated one of the rollers that was making a horrible screeching sound every time the dryer started up.

A very dirty dryer.

Winter did indeed tease us back near the end of October with truly bitter cold air and a bit of snow. I got the fireplace going and of course Natasha and Katia loved it and lived it for a few days. Being off work the fire was going all day and it was a bit shocking how much wood I went through, but with about a full cord and a half we should make it until spring. It helped that the cold snap was followed by a long warm and dry spell where we climbed back into the 70s.

Cozy.

Coming soon to a blog near you: Lighting the bar and installing a weather station!